Permissions
For the application to work correctly it needs:
- Camera
- Microphone
- Contacts (optional)
Initial setup
On first launch the application runs the setup wizard. The server address must be entered. This step can be skipped (done later in “Settings”) by pressing “Continue”.
The profile must then be filled in:
- “Your name” — required;
- “Profile image” (avatar) — optional, can be set later.
To add an image, click the blue button with the camera icon.
The wizard prompts to choose an image from the device gallery.
Access to photos and media must be allowed (required once after installing the application).
After selecting the image and filling in “Your name”, press “Done”.
The “Calls” tab will open.
Your application is ready to use
Server settings
To enter the VCS server address and user credentials, open the “Settings” tab.
The mobile device information will be shown on screen.
Go to “Server settings” and enter the VCS server address in the corresponding field.
After entering the server address, enable authorization.
Note! Without server authorization, only one-way (anonymous) calls to conferences are available. To receive calls from conferences and from other subscribers, authorization is required.
Entering login and password
Credentials must be obtained from the server administrator.
Enter the login and password provided by the server administrator.
Confirm the data.
Click the “Done” button (in the bottom-right corner).
Profile setup
Enter additional information and choose an avatar image.
Go to the “Profile data” section.
Save the profile data by pressing “Done” in the top-right corner of the screen.
Setup complete.