Conference control

Conference control panel

bg-dots
bg-dots

The Conferences → Conference control section opens from the conference number and title link on the Conferences page. Use it to start and stop the room, add participants, and manage layout, recording, webcast, and connection parameters.

Page tabs: “Control”, “Settings”, “Layout”, “Image overlay”, “Participants”, “Audio channels”, “Auto attendant”, “Cascading control”.

Information panel

Header: conference status and quick actions.

Conference number and title – current room as number - title.

Lic – opens license usage for this conference: “Dynamic licenses” and “Video ports licenses in use” (for example “HD 720p connection”, “WebRTC 720p connection”, spectators).

CPU – server CPU load in percent. Updates while the page is open.

“Off” / “On” – conference status. When “On”, elapsed time since start is shown. Click opens the start or stop dialog. On start, “Call all participants” and “Enable recording” are available.

“Dialing” – one-off call by number or URI. Does not add the callee to the “Participants” tab list.

“Add participant” – add an account, group, or participant from another conference.

“Player” – add a video clip as an image source.

Video stream – add an external RTSP/HTTP/UDP stream as a participant.

“Message” – show text on the conference screen.

“Conference log” – event log for the current conference.

“Connection link” – URLs for web client and Vinteo Desktop join, with and without PIN.

On the right: Max bandwidth (TX, RX) and Connected participants.

Tab “Control”

Live controls when the conference is “On”: recording, lecturer, layout, position, presentation, webcast, and the working participant list (including online participants and Video player sources). When “Off”, recording, lecturer, layout, position, presentation, and webcast are inactive.

“Recording” – start/stop recording; the gear opens recording settings.

“Lecturer” – lecturer / main speaker mode.

“Layout” – choose a mosaic template; the button shows the current mode (for example 16p).

“Position” – place participants on the current layout panes.

“Presentation” – accept or stop content sharing.

“Webcast” – enable outbound webcast; the gear opens webcast settings.

On the left of the list bar — add participants. Search filters the list. Page size: 10 / 20 / 50 / 100 / 500. Filter (“All” and sort/status variants: by name, static, connection time asc/desc, “Active (spoke in the last 15 seconds)”, “Online”, “Offline”, “Participators”, “Spectators”, “Request”, “Disconnected”, “On screen”, “On all screens”, “Without disabled anonymous users”).

View modes: list / tiles / compact.

Participant row: name, type or connection protocol, time in call, status (for example Registered). An online participant row is highlighted in green. On the right — the “⋯” menu.

“Additional info” – toggle on the right side of the list bar.

With the toggle off, the row keeps base stream badges. With it on, extra badges appear (see below). Hover a badge for its title. Value pairs are in / out relative to the MCU (in|out).

Base badges (always in the row; filled when the participant is live):

  • Resolution (in|out) – video resolution; often a value such as FullHD;
  • Video codecs (in|out) – video codecs (for example H.264Main);
  • Audio codecs (in|out) – audio codecs (for example G7221, ulaw, opus).

With “Additional info” on:

  • FPS (in|out) – shown as F: frame rate;
  • Bitrate (in|out) – shown as R: bitrate;
  • H.239 resolution (in|out) – H.239: content-channel resolution; - means inactive;
  • H.239 FPS (in|out) – fDV;
  • H.239 bitrate (in|out) – rDV;
  • Lost (in|out) – L: packet loss as count/percent% (for example 0/00.00%);
  • JBuffer (in|out) – J: jitter buffer (for example 21ms);
  • Media server – media node (for example *+localmcu);
  • Audio channels – CH: audio channel state.

Example online Video player with Additional info on: FullHD, H.264Main, G7221, F: 60 0, R: 2838 0, H.239: - -, fDV: 0 0, rDV: 0 0, L: 0/00.00% 0/00.00%, J: 21ms, *+localmcu, CH: 0 0.

Status icons next to the row (shown when the condition applies; exact label is the title on hover):

  • “Attention! Packet loss!”;
  • “Designated lecturer”;
  • “Personal layout”;
  • “Microphone was disconnected” / “Camera was disabled” / “Audio was disabled” / “Video was disabled” – muted/disabled on the MCU (menu “Mute”, “Disable camera”, “Disable audio”, “Disable video”);
  • “Client microphone is disabled” / “Client camera is disabled” – muted/disabled on the client;
  • “Shown as presentation”;
  • “Hidden on the layout”;
  • “VIP participant” – after “Assign VIP”;
  • “Auto-call when the first participant connects (outbound pending)” (AUTO);
  • “creator”;
  • “Prohibition on sending presentation”;
  • “Luna”.

Participant context menu

Opened with “⋯” on the right of the row. The menu header is the participant name (for example Video player). Items depend on type and state; for an active connection the stand shows:

“Call” – call the participant (for Video player and accounts that allow call).

“Disconnect” – end the participant session in this conference.

“Assign VIP” / “Remove the VIP” – set or clear the VIP mark; the row shows or hides “VIP participant”.

“Mute” / “Unmute” – mute or unmute the microphone on the MCU.

“Disable camera” / “Enable camera” – disable or enable the camera on the MCU.

“Appoint lecturer” / “Cancel lecturer” – set or clear lecturer role.

“Do not display the participant in the layout” / “Display the participant in the layout” – hide or show the participant in the mosaic.

“Disable audio” / “Enable audio” – stop or resume receiving participant audio on the MCU.

“Disable video” / “Enable video” – stop or resume receiving participant video on the MCU.

“Send message” – send text to the participant.

“Show as presentation” / “Hide presentation” / “Stop the presentation” – presentation display controls.

“Send invite” – send an invite to the participant.

“Move to webcast” – move the participant to the webcast.

“Move” – move the participant to another conference.

“Send DTMF” – send a DTMF signal.

“Show titer” – show the participant caption.

“Properties” – open participant properties.

“Delete” – remove the participant from the conference list.

Short mute / VIP procedure:

  1. Step 1. Open “⋯” on the participant row.
  2. Step 2. Choose “Assign VIP” — the VIP mark appears on the row.
  3. Step 3. Open the menu again → “Mute” / “Disable camera” — microphone and camera are disabled on the MCU; matching status icons appear.
  4. Step 4. Reverse with “Remove the VIP”, “Unmute”, “Enable camera”.

Mass participant selection

On the “Control” tab the participant list bar shows the “Total selected” counter, “Inverse action” (invert selection), and a mass VIP button (assign VIP to the selection).

On the “Auto attendant” tab, after selecting rows, “Deselect all records (N)”, “Move to current conference”, “Move to another conference”, “Disconnect”, and “Add to blacklist” also appear.

Webcast settings

Opened with the gear on “Webcast”. Title: “Webcast settings”. Tabs: HLS, YouTube, Manual, Layout. Footer: “Close”, “Save”.

HLS

“Resolution” – outbound HLS resolution.

“Bandwidth” – maximum HLS bitrate.

“Enable HLS” – turn HLS delivery on or off.

HLS adaptive bitrate – adaptive bitrate (higher resolutions may increase CPU load).

HLS segment time (sec.) – segment duration; allowed 2–16.

HLS segments in playlist – playlist length; allowed 2–16.

Stream password – webcast password; “Generate” fills a value.

Temporary stream link – link valid while the conference is on.

Webcast link – permanent webcast URL for the conference.

YouTube

YouTube publish parameters (stream key/URL and related fields).

Manual

Manual outbound stream settings.

Layout

The “Layout” tab opens webcast layout configuration for viewers.

Tab “Settings”

Permanent conference parameters. Apply changes with “Save” at the top of the form. The form is split into blocks — each is described below with its own screenshot. Some fields appear only after the related toggle is enabled.

Main settings

“Conference” – room number. Read-only. The number is set when the conference is created or copied.

“Title” – display name in the conference list and in the control header.

“Description” – text description. Maximum 1024 characters.

“Organizer’s email” – organizer address. Editable when “Notify participants by Email” is on.

“Notify participants by Email” – sends notifications using the organizer email.

“Schedule conference” – enables start scheduling. When on, additional fields appear:

  • “Start date and time” – date, time, and session duration in minutes;
  • “Repeat” – recurring schedule. When on: “Repetition frequency” (Daily / Weekly / Monthly), “When to repeat” (“Every day” / “Every workday”), “When to end” (“Forever” / “Until”), and the repeat step;
  • “Call all participants” – at the scheduled start, dial the “Participants” list using “Call settings”.

“Moderators” – accounts that can manage this conference. Search and filter “All” / “Show selected”. Used by “Call all participants after moderator join”, “Drop all participants after moderator disconnect”, and “Deny joining the conference without a moderator”.

“PIN” – guest access code and for “… + PIN” links. Length 1–15 digits, must not start with 0. “Generate” creates a new value. After a PIN change, previously issued PIN links stop working.

Call settings

Auto-dial parameters for the “Participants” list. Used for “Call all participants” on start and in the schedule, for “Call all participants after moderator join”, and for “Recall self disconnected participants”. Does not apply to “Dialing”.

“Participant call duration (sec.)” – wait time for one attempt. Range: 1–60.

“Number of call attempts” – retries on busy or no answer. Range: 1–9.

“Interval between calls (sec.)” – pause between attempts. Range: 1–180.

Default connection settings for anonymous participants

Maximum channel width, resolution, and FPS for guests without an account profile. Apply when anonymous or open connections are enabled. Do not override participants that already have their own parameters. Set separately for SIP/H.323 and for WS (web client / Vinteo Desktop).

“Channel width / Resolution / FPS for SIP and H.323 participants” – limits for SIP and H.323 terminals.

“Channel width / Resolution / FPS for WS participants” – limits for the web client and Vinteo Desktop.

Connection settings

“Maximum number of participants” – concurrent connection limit. 0 means unlimited. New joins are rejected when the limit is reached. The “Participants” list is unchanged.

“Enable notification when connecting” – plays a join notification to the participant.

“Allow anonymous connections to the conference” – allows join without an account. Does not replace “Open conference”. Media limits for such joins come from the anonymous block above. Often combined with “PIN”.

“Deny sending presentation to WS participant” – blocks content sharing to WebSocket participants (web client / Vinteo Desktop).

“Open conference” – allows join and dial-in without a preconfigured participant list. Independent of “Allow anonymous connections to the conference”.

Conference properties

“Do not end the conference” – prevents automatic stop (by schedule or when no participants remain). The room stays “On” until stopped manually.

“Notify participants about the end of the conference in the layout” – shows an end warning in the layout before a scheduled finish. When on, “Time before the end of the conference to notify (min.)” is available (2–15).

“Recall self disconnected participants” – after a drop, redials a listed participant who left on their own. Does not redial participants disconnected by a moderator. Retry parameters come from “Call settings”.

“Automatic mute on connection” – joins participants with microphone off.

“Call all participants after moderator join” – dials the “Participants” list when a moderator connects.

“Drop all participants after moderator disconnect” – ends the session for others when the last moderator leaves.

“Deny joining the conference without a moderator” – rejects ordinary participants while no moderator is in the conference.

“Show screenshots after connecting” – stores a preview frame on first join.

“Enable layout logs” – logs pane assignment changes.

“Allow participants to request the word” – enables the floor request (“hand”) in the client. When on, “Timeout for word request (min.)” is available (1–60).

“Allow participants to use the “White board”” – enables the whiteboard in the client.

“Enable audio tags in conference” – plays audio tags.

“Enable video tags for WebRTC connections” – enables video tags for WebRTC. Does not apply to SIP or H.323.

“Enable reactions” – allows client reactions.

“Automatic adjustment of the sound gain from the participant” – enables AGC on incoming participant audio.

“Enable chat” – enables conference text chat. When on, “Clearing the chat when the first participant connects” is available.

“Client resolution selection optimisation for WS connections” – “Disabled”, “Minimal”, “Enabled”.

“Client resolution selection optimisation for SIP connections” – “Disabled” / “Enabled”.

“Client devices synchronization mode” – “Duplex” syncs camera and microphone between client and server; “Off” disables sync.

“What connections can be seen by participants”:

  • “None”;
  • “Those that are displayed on screens (layouts)”;
  • “Everything except hidden”;
  • “Everything like a moderator”.

A moderator always sees the full list.

“WebRTC participants connection mode”:

  • “Forcibly connect as a participant”;
  • “At the discretion of the client”;
  • “Forcibly connect as a spectator”.

“Presentation FPS” – content-sharing frame rate (1, 3, 5, 10, 15, 25, 30, 60).

Layout properties

Mosaic options for live video, recording, and webcast. “Don’t show your own video” disables “Automatic assigned panels”.

“Lecturer’s personal layout” – gives the current lecturer a separate layout. When on, the “Previous lecturer” position switches to “Auto”.

“Automatic assigned panels” – lets free participants temporarily occupy panes reserved for not-yet-connected participants.

“Don’t show your own video” – excludes the participant’s own image from the shared mosaic on their screen.

“Show participants without video” – shows panes for participants without a video stream.

“Do not take the position of “Lecturer” to assigned panels” – prevents voice-based lecturer selection for a participant already pinned to a pane.

“Enable titers” – shows a caption on the participant selected as lecturer.

“Enable automatic messages” – shows join/leave, recording/webcast start/stop, and presentation messages.

“Presentation without a lecturer” – shows only the presentation in recording, webcast, and clients without a separate content stream.

“Borders around the participants” – draws thin frames around mosaic panes (except the active one).

“Conference recording indication” – draws a red frame around the screen while recording.

“Confidentially” – shows a confidential-mode warning.

“Layout aspect ratio 4:3” – builds the mosaic in 4:3.

“Show watermark” – shows participant names on panes. When on, watermark styling fields are available.

“How to display participants in layout” – “Fit”, “Crop”, “Stretch”.

“Font color”, “Font size watermark” (1–90), “Watermark position” (“Standard” / “At the bottom of the screen”), “Duration watermark (sec.)” (0 = always, max 100), “Display watermark background”, “Background color”, “Background transparency” (0–100), “Background type” (“Framing” / “By all width”) – watermark styling.

“Scroll interval” – interval for rotating participants when there are more participants than panes (10–300).

“The minimum period before the change of lecturer (ms)” – hold time before voice-based lecturer switch (1000–10000).

“Remove lecturer frame” / “Lecturer frame color” – disable or set the active lecturer frame color.

“Use image as layout background” – when on, “Background image” appears (JPG or PNG).

“Do not display the “You are currently the only participant in the conference” welcome screen” – hides the single-participant splash.

Audio channel properties

“Volume of quiet audio channels” – volume for quiet-mode channels (0–10). Channel assignments are configured on the “Audio channels” tab.

“Automatic quiet audio channels” – “Disabled”, “By group”, or “By Translator”.

Tab “Layout”

Mosaic template and pane assignment. “Save” applies the scheme. “Save as preset” adds it to “Presets” for the “Mosaic” dialog on the “Control” tab.

Tab “Image overlay”

Graphic slides over the conference video: enable overlay, preview, “Add slide”.

Tab “Participants”

Permanent participant list and parameters. Used for auto-dial and layout selection.

Show – page size on the form.

“Search” – filter the table.

“Clear conference” – removes all participants from the list.

Header actions on the right: add participant, add group, delete selected.

Columns: “#”, “Description”, “IP”, “Mosaic” (global = shared layout), “Channel”, “FPS”, “Resolution”, “Actions”.

Tab “Audio channels”

Public (#0–#9) and private (#10–#19) audio channels. Each channel has a name, code, and state (“Common” for #0, “Enabled” for others). Values are used in the participant “Channel” field and in quiet-channel settings on “Settings”. “Save” writes the scheme.

Tab “Auto attendant”

Queue of callers in auto-attendant mode: call to a stopped conference, unknown number, or PIN entry. While the caller waits, the row stays in the table.

Filters: page size, “Search”, “Conference” filter (“All” or a specific room).

Columns: “Screenshot” (preview and wait duration), “Display name (watermark)”, “Participant number”, “Connection time to the auto attendant”, “Dialed number”, User agent.

With rows selected: “Deselect all records (N)” and actions “Move to current conference”, “Move to another conference”, “Disconnect”, “Add to blacklist”.

Tab “Cascading control”

Distributes the conference and connections across media servers.

Transferring conferences between media servers block:

localmcu load – current media-server load in percent.

“Transfer to a media server” – choose the target media server (for example localmcu).

“Transfer to” – move the conference to the selected media server.

Distribution of connections between media servers block:

Threshold field (allowed 5–999): when the number of connected participants exceeds this value, further connections go to less loaded media servers.

“Save” – store the distribution threshold.

Dialing

“Number” – number or URI; protocol SIP (UDP) / SIP (TCP) / SIP (TLS) / H.323.

“Resolution”, “Bandwidth”, “FPS” – media parameters for the call.

“Close” – close without dialing.

Add participant

Title: “Add participant to …”. Tabs: “Choose from the list”, “Transfer from another conference”, WebC.

Fields include call participant, account group, connection description/URI, bandwidth, resolution, FPS, automatic call on first participant, and start connection process.

“Close”, “Add”.

Player

Video – clip from the server video library.

Enable auto-repeat – loop playback.

“Close”, “Add”.

Video stream

Stream description and URI; option to hide the participant in the layout.

“Close”, “Add”.

Message

Recipients (everyone / choose from list), message text, “Display settings” (font, position, repeats, background, speed).

“Save as template”, “Clear screen”, “Send”, “Close”.

Conference log

Event log for the selected conference. “Close”.

“Web-client”, “Web-client + PIN”, “VinteoDesktop”, “VinteoDesktop + PIN”. “Close”.

Conferences Address book