Dedicated NLS

nls-client on the VCS server and a separate nls-server in the customer perimeter to Root NLS

bg-dots
bg-dots

Production scheme when the NLS runs apart from the VCS server: nls-client on the Vinteo host connects to nls-server in the customer perimeter, and that NLS connects to Root NLS.

Components:

  • Root NLS — Vinteo’s root network license server (root.nls.vinteo.dev);
  • nls-server — a separate host in the customer perimeter;
  • nls-client — on the Vinteo server.
Attention!
Activating the NLS in Root NLS and issuing the license pool is performed by technical support (support@vinteo.ru). Confirm Root NLS network addresses with support before adding them to a long-term allowlist.

See also: Choosing a licensing scheme, Local NLS.

Requirements

On the NLS host, Debian 13 requires the libengine-gost-openssl library. Agree the package and installation method with technical support if the library is not available in your repositories.

In production, the dedicated nls-server connects to the production Root NLS. The VCS server must reach the NLS over TCP 4000.

On the VCS host, if a local nls-server is not used for other roles, stop it and disable autostart so the client does not mix local and dedicated NLS:

systemctl stop nls-server.service
systemctl disable nls-server

Installing nls-server on the dedicated host

Step 1. On the NLS host, install dependencies (including libengine-gost-openssl) and the NLS server package:

apt reinstall nls-server-net

Step 2. Before activation, check /etc/vcs/nls/nls.conf on the NLS host:

  • IP_TCP_OUT — Root NLS address agreed with support;
  • NAME — the full name of your NLS.

Activating nls-server

Step 3. Start the NLS server on the dedicated host:

systemctl start nls-server

The service may remain in a waiting state until confirmation in Root NLS. This is expected.

Step 4. Tell technical support the NLS name from the configuration. Support activates the server in Root NLS and issues the license pool.

Step 5. After licenses are issued, restart the service and enable autostart:

systemctl stop nls-server
systemctl start nls-server
systemctl enable nls-server

Registering nls-client on the VCS server

Step 6. On the VCS server, register the client with the dedicated nls-server:

client -reg

In the wizard, provide:

  • encryption — 1 (GOST);
  • server — IP address or host name of the dedicated NLS in the customer perimeter;
  • port — 4000;
  • host name — the VCS server name for which licenses are requested.

Step 7. Start the NLS client:

systemctl start nls-client

The client connects to the dedicated NLS over TCP 4000.

Verification

On the NLS host:

systemctl status nls-server
network_license_server --version
cat /etc/vcs/nls/nls.conf

On the VCS server:

systemctl status nls-client
cat /etc/vcs/nls-client/default.conf
journalctl -u nls-client -e

NLS connection status and licenses are shown in the VCS web interface under System → Licenses.

Local NLS Closed perimeter