List

Subscriber account management

bg-dots
bg-dots

The Accounts → List section is used to view, search, filter, and manage subscriber accounts.

Account operations

Contains action buttons for the account list. Without a selection, “Add” and “Add multiple” are available. When one or more table rows are selected, bulk-action buttons appear in the header, and “Deselect all records (N)” appears on the right side of the filter bar.

“Add” – create one account with the full parameter set (“Main”, “Extended”, “Avatar” tabs).

“Add multiple” – create several accounts with the same settings in a number range (useful for a series of terminals or test accounts).

“Add to the conference” – add existing accounts to a chosen conference without opening Conferences; appears after rows are selected.

“Add to the group” – assign selected accounts to a group for later filtering and bulk actions; appears after rows are selected.

“Delete selected” – remove the marked accounts from the server. Confirmation prompt: “Are you sure you want to delete all selected records?”

“Deselect all records (N)” – clear the selection so bulk buttons hide. Shown on the right of the filter bar; N is the number of selected records.

Search and filters

Used to find accounts quickly in a long list. When a selection is active, “Deselect all records (N)” is also available on the right side of this bar.

Records per page – how many rows to show on one table page. Default is 100. Available values: 10, 20, 50, 100. A smaller value makes browsing lighter on slow links and simpler when using checkboxes.

“Search” – find an account by a fragment of number, title, IP, type, group, or e-mail. The magnifier button starts the search.

“Type” – show only accounts of the selected connection method (SIP phones, WebRTC clients, and so on). Default is “Any”. Available values: “Any”, WS, SIP, H.323, Loop, LDAP.

“Group” – limit the list to one group or to accounts with no group. Default is “Any”. Available values: “Any”, “No group”, and groups from Accounts → Groups.

“Source” – filter by where the record comes from (locally created on this server). Default is “Any”. Available values: “Any”, “Local”.

Accounts table

The main working list: who exists on the server, whether the account is online, and key parameters. The “Number”, “Title”, “Status”, “Type”, and “Group” columns sort by clicking the header.

Header checkbox – select all rows on the current page for bulk operations.

Row checkbox – select one account.

“Number” – unique account number (login). The link opens “Update account …”.

“Title” – how the account is shown to people (in lists and conferences). The link also opens editing.

“IP” – the address the endpoint uses or usually uses. dynamic means the address is not fixed and is taken from registration.

“Status” – whether the account is registered on the server right now (for example, “Connected” or “Disconnected”).

“Type” – which protocol / client the account uses (SIP, H323, WS, and others).

“Bandwidth” – the channel limit set for this account (for example, 1.5 Mb/s). Keeps the server from sending more media toward the account than its network can carry.

“Group” – which group the account belongs to; empty means no group.

“Source” – where the account record comes from (for example, “Local” — created by an administrator on this server).

“Tenant” – tenant membership in a multi-tenant setup; usually empty when tenants are not used.

A message below the table shows the filter result, for example: “Shown all records”.

Add

Creates one account in the “New account” dialog. Tabs: “Main” (who the account is and basic media), “Extended” (protocol and endpoint compatibility), “Avatar” (image instead of video). The field set depends on “Type”: SIP fields are not needed for WS; some H.323 fields appear only for H323. Footer on every tab: “Close” (do not save) and “Add” (create the record).

Tab “Main”

“Type” – how the account will connect to the server. It decides which password and extended fields are needed. Default is SIP.

  • SIP – hardware or soft SIP endpoint (phone, codec, SIP client);
  • WS – Vinteo Desktop or web client over WebRTC;
  • H323 – H.323 endpoint;
  • Loop – a loop to a remote server through an already configured gateway (the account represents the other MCU/server side).

“Number” – unique identifier. The same value is used to register the endpoint and to sign in to the personal account. Allowed: numbers from 100 to 999, or Latin letters and digits. When the form opens, a free suggested number is filled in — it can be changed before create.

“Reflect in address book” – show this account in the server address book so others can dial it or add it to a conference from the book.

“Title” – human-readable name (person, room, terminal label). This is what people usually see instead of the bare number.

“Telephony registration password” – password configured on the SIP/H.323 endpoint for registration on the server. Shown only for SIP and H323. Without the correct password the endpoint will not register.

“Generate” – fill the neighbouring password field with a random strong value (next to the telephony password and next to the personal-account password).

“Password” – password for the subscriber personal account in the web UI (not the endpoint registration password). Must comply with server security policies.

“The user must set the password himself” – do not issue a ready personal-account password: the subscriber sets it at first sign-in. Useful when an administrator creates the account but only the user should know the password.

“Blocked” – deny sign-in to the personal account (for example after offboarding or compromise). SIP/H.323 registration and calls usually keep working. For WS, blocking also disables client authorization and calls.

“E-Mail” – where to send notifications to the subscriber (including scheduled conferences).

“VIP participant” – special conference status: the participant stays above ordinary ones and is marked “VIP”; the moderator cannot remove VIP or disconnect them. Used for executives and key speakers.

“Group” – attach the account to a group immediately (department, site, device class). Groups are used later in list filters and bulk actions. Default is “No group”.

“Add to conference” – already at create time, place the account into one or more conferences so a separate step after save is not needed. Search narrows the conference list; “Show selected” keeps only marked conferences on screen.

“Stream resolution” – default video quality for multi-party conferences, chosen for the camera and the network. Default is HD 1280x720. The list ranges from UltraHD(4K) 3840×2160 to 128x72 (including FullHD 1920x1080, CIF 352x288, and others).

“Bandwidth” – upper bitrate toward the account. Too high for the link causes artefacts and drops; too low saves bandwidth at the cost of quality. Default is 1.5 Mb/s. List range: 64 Kb/s to 10 Mb/s.

“Resolution for P2P calls” – separate quality limit for point-to-point calls (not multi-party). Default is HD 1280x720. Options include FullHD 1920x1080, HD 1280x720, 640x360, 320x180, 4CIF 704x576, CIF 352x258.

“Behind NAT” – tell the server how to treat the connection if the account is behind address translation (office NAT, home router). Default is no.

  • no – do not apply special NAT handling (typical when NAT is not an issue or is handled otherwise);
  • yes – the account is behind NAT; the server applies matching media handling;
  • never – never apply the “behind NAT” scenario for this account.

“Close” – close without creating the account.

“Add” – save the new account.

Tab “Extended”

Protocol and compatibility settings for the specific endpoint. Defaults are usually fine; change them when the device needs a special port, transport, codec set, or presentation mode.

“IP” – fixed endpoint address. Fill when SIP/H.323 runs without registration (the server dials that IP). If the endpoint registers on the server, leave dynamic (“Dynamic”) — the address comes from registration.

“Port” – signalling port on the account side. Default is 5060 (SIP). For H.323 usually 1720. Change only if the endpoint uses a non-default port.

“Transport” – how SIP signalling (and related traffic) is carried. Shown for SIP. Default is UDP (most common). TCP if UDP is blocked; TLS if encrypted signalling is required.

“Insecure” – how strictly the server checks the SIP account on incoming messages. Shown for SIP. Default is port. Change only for compatibility with old or non-standard gear: softer values weaken checks.

  • port – verify IP, do not require port match;
  • invite – do not require authentication of incoming Invite;
  • very – weaken authorization checks as far as this option allows.

Qualify – periodically send SIP Options to see whether the endpoint is alive. Useful for status monitoring; on unstable networks frequent Options can add load. When enabled, the switch shows “Yes”.

“Codecs” – which audio and video codecs this account may use. Right — already assigned (used in negotiation); left — not selected yet. Move by clicking the name. Keep the intersection with the endpoint capabilities (often h264, opus / g722, and so on); remove extras to avoid incompatible negotiation.

“H.264 High Profile” – require H.264 High Profile on an H.323 device (better compression/quality when the hardware supports it). If the endpoint lacks the profile, the call may fail — leave disabled in that case.

“Send H.239 content in main stream” – how presentation (second video) is sent on H.323. Off — separate H.239 stream (preferred for most endpoints). On — merge presentation into the main video if the endpoint handles a separate content stream poorly.

“Connect media streams before answer” – start media before the callee answers (FastStart). Speeds up picture/sound after answer; on some devices it causes issues — disable then.

“DTMF mode” – how the account sends DTMF (IVR, conference PIN, and so on). Default is rfc2833 (standard for most SIP). Change if the endpoint sends DTMF differently: info (SIP INFO), inband (in audio), auto (server chooses).

“BFCP” – protocol for the second SIP video stream (content/presentation). Default is UDP. TCP if UDP BFCP is unavailable. NONE — disable the second stream (no BFCP content).

“Media Encryption” – encrypt audio/video with SRTP for SIP. Enable when policy requires encrypted media and the endpoint supports SRTP. Switch label: SRTP.

“Skype4B” – compatibility mode for Skype for Business / Lync. Enable only for those clients; ordinary SIP endpoints do not need it.

“Don’t show this account in layout” – do not place the account on automatic layout tiles (its video will not occupy a layout cell). Used for service accounts and interpreters whose video should not take layout space.

“Interpreter” – mark the account as an interpreter so the server applies interpreter logic in the conference (a role distinct from ordinary participants).

“Filtering RTP” – accept media only from the expected stream/port and drop extra RTP from the same port. Enable when streams are duplicated or the endpoint sends spurious media packets.

“Volume of sound to the participant” – boost or attenuate the mix this account hears. 0 dB means no correction; adjust if this participant is consistently too quiet or too loud.

“Volume of sound from the participant” – boost or attenuate the audio this account sends into the conference. Use when the endpoint microphone is clearly quieter or louder than others.

Tab “Avatar”

Sets a static image for the account. It is shown in the layout instead of video if the participant is placed on screen but is not connected yet, or is connected audio-only — so the layout shows a person card instead of an empty pane.

“Avatar” – current image.

“Select an image” – upload a file. Requirements: JPG, up to 10 Mb, resolution from 320x180 to 3840x2160.

Add multiple

The “Add multiple accounts” dialog creates a series of similar accounts (for example numbers 101–120 for a room). Tabs “Main” and “Extended”; no “Avatar” tab. Passwords, VIP, blocked, and e-mail are not set here — configure them later under Edit per record if needed. Shared media and protocol parameters from the tabs apply to every number in the range.

Tab “Main”

“Type” – one connection type for the whole range (same meaning as in “Add”).

“Number” – range bounds: “From” (first) and “To” (last), inclusive. Allowed numbers: 100–999. One account is created per number.

“Title” – one display name for all created records (often edited later one by one).

“Group” – common group for the whole range. Default is “No group”.

“Add to conference” – enrol all created accounts in the selected conferences (search, “Show selected”).

“Stream resolution”, “Bandwidth”, “Resolution for P2P calls”, “Behind NAT” – same meaning as on the “Main” tab of “Add”; values are copied to every record. Defaults: HD 1280x720, 1.5 Mb/s, HD 1280x720, no.

“Close” – close without creating.

“Add” – create all accounts in the range.

Tab “Extended”

The same protocol parameters as on the “Extended” tab of single create (“IP”, “Port”, “Transport”, “Insecure”, Qualify, “Codecs”, H.239/FastStart, DTMF, BFCP, SRTP, Skype4B, layout/interpreter, RTP filtering, volume). Set once — inherited by every account in the range.

Edit

Change an existing account. Opened from the “Number” or “Title” link. Title: “Update account …”. Tabs “Main”, “Extended”, and “Avatar” match create; “Sessions” is added. Shared field meanings do not change. Form differences:

  • “Number” cannot be changed — the record id is fixed;
  • there is no “Add to conference” block: add to a conference from the list (“Add to the conference”) or from Conferences;
  • leave “Password” empty to keep the current personal-account password; to change it, enter a new value or use “Generate”;
  • footer: “Close” (no save), “Delete” (delete only this account), “Save” (write changes).

The “Extended” tab has the same connection parameters as in create:

Tab “Sessions”

Controls personal-account sign-in: reset two-factor authentication and revoke open sessions. Block “Authentication and sessions”.

“Reset two-factor authentication” – clear configured 2FA for this account so the subscriber can sign in again and set up 2FA if needed.

“Revoke all sessions” – forcibly end all active web UI sessions for the account (sign-out on all devices).

“Active sessions” – list of current sessions. When none are open, the text is “No active sessions.”

Add to the conference

Bulk-add the accounts marked in the table to one existing conference (participant list grows without opening each account card).

“Add to the conference” – which conference to use (list format “(number) name”).

“Selected accounts” – who will be added; below the list — “Total N selected accounts”.

“Close” – close without changes.

“Add to the conference” – perform the add.

Add to the group

Assign the marked accounts to one group — so the list can be filtered and managed together later.

“Group” – target group.

“Selected accounts” – who is assigned; below the list — “Total N selected accounts”.

“Close” – close without changes.

“Add to the group” – perform the assignment.

Delete selected

Permanently delete the marked accounts. Confirmation: “Are you sure you want to delete all selected records?”

“Delete selected” – confirm and delete.

Accounts Groups