Incoming calls

Incoming call filtering

bg-dots
bg-dots

The System → Incoming calls section is used to protect against unwanted SIP calls and to configure domain-based routing: antispam rules, IP blacklist and whitelist, User-Agent blocking, and the local domain list. Settings apply to calls arriving at the server; changes on “Incoming call settings” and “Routing” are saved with the “Save” button of the respective tab.

Incoming call settings

Incoming call handling and antispam rules. The “Incoming” block groups number-length limits, User-Agent checks, auto attendant, and B2B options.

  • “Do not accept incoming calls to numbers longer than N characters” – rejects a call if the dialed number is longer than the specified length; the field sets the length threshold.
  • “Blocking by User-Agent” – rejects SIP requests whose User-Agent header matches an entry in the system scanner list.
  • “View the list of User-Agents that will be blocked” – opens a dialog with the blocked User-Agent values.
  • “Call blocking by connection time in auto attendant” – drops a call if it stays in the auto attendant longer than the specified time in minutes.
  • “Auto-attendant audio greeting” – audio greeting mode. Available values: “Enabled”, “Disabled only for video calls”, “Disabled”. The new value takes effect after the server is restarted.
  • “Allow B2B calls for subscribers” – allows accounts to initiate B2B calls.
  • “Save” – writes the tab settings to the server.

Blocked User-Agent list

Opened by the “View the list of User-Agents that will be blocked” link.

Shows the fixed list of User-Agent values blocked when “Blocking by User-Agent” is enabled: friendly-scanner, sundayddr, vaxsipuseragent, sipcli, custom, pplsip, sipscan, sipvicious, sipptk. The list is view-only.

  • “Close” – closes the dialog.

Blacklist

Table of IP addresses and subnets whose packets the server drops. The “Enable” switch activates the list: when off, records are kept but do not filter traffic. If there are no records, the message “No records found by current filter” is shown; after an address is added, a table row appears.

  • Page size – 10, 20, 50, 100.
  • “Address” – IP address or network in IP/CIDR form.
  • “Reason for adding” – text reason the address was added.
  • “Date/Time of last modification” – last change time.
  • “Added by” – who added the record.
  • “Actions” – actions for the record (edit or delete).
  • “Add” – opens the add-address dialog.

Add address to the blacklist

  • “IP/CIDR” – IP address or subnet (for example, 203.0.113.10 or 203.0.113.0/24).
  • “Reason for adding” – text reason for audit.
  • “Add” – saves the record to the list.
  • “Cancel” – closes the dialog without saving.

Step 1. Open the “Blacklist” tab and, if required, turn on “Enable”.
Step 2. Click “Add”, enter “IP/CIDR” and “Reason for adding”.
Step 3. Click “Add” in the dialog and confirm that the row appears in the table.

Whitelist

Table of trusted IP addresses excluded from automatic blocking. Columns match the blacklist. The “Enable” switch activates the whitelist. An empty list shows “No records found by current filter”.

Add address to the whitelist

  • “IP/CIDR” – IP address or subnet.
  • “Reason for adding” – text reason.
  • “Add” – saves the record.
  • “Cancel” – closes the dialog without saving.

Step 1. Open the “Whitelist” tab and, if required, turn on “Enable”.
Step 2. Click “Add”, fill in “IP/CIDR” and the reason.
Step 3. Click “Add” in the dialog.

Routing

The “Incoming call routing settings” block controls domain-based handling of incoming calls.

  • “Enable domain-based routing” – turns on matching of the incoming call against the local domain list.
  • “Local domain list” – domains treated as local; “Add” creates a new empty row for a domain value.
  • “Save” – saves the tab settings.

Step 1. Enable “Enable domain-based routing”.
Step 2. Click “Add” under “Local domain list” and enter a domain.
Step 3. Click “Save”.

Settings Licenses