The System → Default settings section sets values applied when a new conference is created. Existing conferences are not changed here — edit those in the conference settings. The page provides the “Conferences” area with tabs “Layout Settings”, “Other Settings”, “Layout Selection”, “Audio Channels”, and “Conference Management”.
Layout Settings
Layout display and watermark defaults for new conferences.
-
“Lecturer’s personal layout” – the lecturer gets a layout independent of the shared mosaic; when enabled, the “Previous lecturer” position is set to “Auto”.
-
“Automatic assigned panels” – empty layout cells are filled with participants without manual assignment.
-
“Do not display your own video” – the participant does not see their own stream in the layout.
-
“Display participants without video” – participants without a video stream still get a cell (avatar/placeholder).
-
“Do not take a position “Lecturer” assigned panels” – manually assigned cells do not take over the lecturer position when the speaker changes.
-
“Enable title” – shows participant names under layout cells.
-
“Enable automatic messages” – the server shows service messages in the layout (join/leave and similar).
-
“Presentation without a lecturer” – presentation content fills the screen even if the lecturer video is not shown.
-
“Frames of participants” – draws borders around cells (helps distinguish participants in a dense mosaic).
-
“Indication of conference recording” – shows a recording indicator on the layout.
-
“Confidential” – restricted access mode for conference content (per product policy).
-
“Relations of layout sides” – locks the layout aspect ratio to 4:3 instead of widescreen.
-
“Display watermark” – overlays a watermark; when enabled, appearance fields below become available.
-
“Scroll period (sec.)” – how often layout “pages” rotate when there are many participants;
10–300. -
“The minimum period before the change of lecturer (ms)” – delay before switching the lecturer cell when speakers change quickly;
1000–10000. -
“Method of displaying participants in the layout” – how video fits the cell: “Fit”, “Crop”, “Stretch”.
-
“Text color” – watermark text color.
-
“watermark font size” – watermark font size;
1–90. -
“watermark position” – where the watermark appears: “Standard” or “At the bottom of the screen”.
-
“watermark display time” – how long the watermark stays visible;
0means always; maximum100. -
“Display watermark background” – background under the watermark text.
-
“Background color” – watermark background color.
-
“Background transparency” – watermark background transparency;
0–100. -
“Background type” – background shape: “Framing” or “By all width”.
-
“Remove the lecturer’s frame” – does not highlight the lecturer cell with a separate frame.
-
“The color of the lecturer’s frame” – lecturer frame color (when the frame is shown).
-
“Use image as layout background” – uses an uploaded image instead of a solid layout background.
-
“Do not display the “You are currently the only participant in the conference” welcome screen” – a single participant sees the layout immediately, without the waiting splash screen.
-
“Save” – saves the tab settings.
Other Settings
Conference Properties
- “The length of the PIN code during auto-generation” – length of the PIN the server generates;
1–60. - “Do not turn off the conference” – the conference does not stop automatically on a timer or when participants leave.
- “Notify participants about the end of the conference in the layout” – shows a warning on screen before a scheduled end.
- “Time before the end of the conference to notify (min.)” – minutes before the end to show the warning;
0–10. - “Call back those who have disconnected themselves” – the server redials participants who hung up themselves.
- “The microphone is turned off when connected” – new participants join muted (less noise on entry).
- “Call participants when the moderator enters” – when the moderator joins, the server dials the other listed participants.
- “Disconnect participants when moderator exits” – when the moderator leaves, other sessions are disconnected.
- “Deny joining the conference without a moderator” – join is rejected until a moderator is present.
- “Show screenshots after connecting participants” – conference control shows participant frame previews.
- “Enable layout logging” – layout changes are written to the log (for incident review).
- “Allow participants to request a word” – participants can signal “request floor”; the moderator sees the queue.
- “Allow participants to use the “White board”” – participants can use the shared whiteboard.
- “Enable audio tags in conferences” – audio tags are added to calls (requires the prefix in Audio tags).
- “Enable video tags for WebRTC connections” – enables video tags for WebRTC participants.
- “Enable reactions” – participants can send reactions visible in the conference.
- “Automatic adjustment of the sound gain from the participant” – the server levels speech volume across participants.
- “Enable chat” – participants can exchange text messages inside the conference.
- “Clear chat when first participant connects” – chat history is cleared when the first participant joins an empty conference.
- “Timeout for word request (min.)” – minutes after which an unanswered floor request is dropped;
1–60. - “Optimization of client resolution selection for WS connections” – how the server picks resolution for WebSocket clients: “Disabled”, “Minimal”, “Enabled”.
- “Optimization of client resolution selection for SIP connections” – the same for SIP: “Disabled” / “Enabled”.
- “Client device synchronization mode” – state sync between devices of one participant: “Off” or “Duplex”.
- “Which connections are visible to ordinary participants” – whom a regular participant sees in the list: “None”, “Those that are displayed on screens (layouts)”, “Everything except hidden”, “Everything like a moderator”.
- “WebRTC participant Connection mode” – role when joining from a browser: “Forcibly connect as a participant”, “At the discretion of the client”, “Forcibly connect as a spectator”.
- “Presentation FPS” – frame rate of the second stream (content); values from the form list (
1–60).
Moderators
Accounts and groups that receive moderator rights by default in new conferences. Search, filter, and checkbox selection are available; the “Show selected” block lists the selected entries.
Audio Channel Properties
- “Volume of quiet audio channels” – level of “quiet” interpretation/background channels;
1–9. - “Automatic silent audio channels” – how quiet channels are assigned: “Disabled”, “By group”, “By Translator”.
Connection Settings
- “Maximum number of participants” – hard limit on simultaneous participants;
0means unlimited. - “Enable notification when connecting” – plays a sound when a participant joins.
- “Allow anonymous conference calls” – allows join without an account (guest).
- “Deny sending presentation to WS participant” – WebSocket participants do not receive the presentation stream.
- “Open Conference” – join by conference number without being pre-added to the participant list.
Call Settings
- “Duration of the participant’s call (sec.)” – length of one dial attempt;
1–180. - “Number of call attempts” – how many times to retry dialing.
- “Interval between calls (sec.)” – pause between attempts.
Allow anonymous connections to the conference
Default media parameters for guest connections (when anonymous join is allowed).
-
“Channel width for SIP and H.323 participants” – bitrate for SIP/H.323 guests.
-
“Resolution for SIP and H.323 participants” – video resolution for SIP/H.323 guests.
-
“FPS for SIP and H.323 participants” – frame rate;
15,25,30,60. -
“Channel width for WS participants” – bitrate for WebSocket guests.
-
“Resolution for WS participants” – resolution for WebSocket guests.
-
“FPS for WS participants” – frame rate for WebSocket;
15,25,30,60. -
“Save” – saves the tab settings.
Layout Selection
-
“Selected layout” – which layout a new conference starts with.
-
“Selection of conference layouts” – layouts the moderator can switch between.
-
“Save” – saves the tab settings.
Audio Channels
Names and enable flags for interpretation/service audio channels inherited by new conferences.
-
“Public audio channels” – channels
# 0–# 9; each has a name and enabled state. -
“Private audio channels” – channels
# 10–# 19; same fields. -
“Save” – saves the tab settings.
Conference Management
Recording Settings
Defaults used when recording starts for a new conference.
- “Resolution” – recording file resolution.
- “Bandwidth” – recording bitrate.
- “Record audio only” – stores audio only (smaller files).
- “Protocol recording” – stores conference protocol data together with media.
- “Automatic conference recording” – recording starts automatically when the conference starts.
Webcast settings
Default HLS parameters for new conferences.
-
“HLS resolution” – webcast stream resolution.
-
“HLS channel width” – HLS bitrate.
-
“Enable HLS” – enables HLS for a new conference by default.
-
“HLS adaptive broadcast bitrate” – multiple qualities for the player; above 1080p the stream is transcoded to
1080p,720p,360p, and240pand increases CPU load. -
“HLS segment time, sec” – length of one playlist segment;
2–16. -
“HLS number of segments in playlist” – how many segments to keep in the playlist;
2–16. -
“Save” – saves the tab settings.