The System → Gateways section is used to view, create, edit, and delete gateways, and to configure call routing through external SIP and H.323 systems.
Search and filters
Limits the list of displayed gateways.
- Records per page – number of rows in the table. Default is
100. Available values:10,20,50,100. - “Type” – filter by gateway type. Default is “Any”. Available values: “Any”,
H.323,SIP.
Gateways table
Shows configured gateways.
- “Gateway” – gateway name (for example,
456); the link opens the edit form. The column supports sorting. - “Status” – IP address or gateway state (for example,
10.23.50.10). The column supports sorting. - “Type” – gateway protocol (for example,
SIP). The column supports sorting. - “Routes” – route directions (for example,
900, 1900). The column supports sorting. - “Incoming” – whether incoming calls are accepted (“Yes” / “No”). The column supports sorting.
- “Outgoing anonymous” – whether anonymous outgoing calls are allowed (“Yes” / “No”). The column supports sorting.
- “Actions” – edit and delete buttons.
A message below the table shows the number of records (for example, “Shown 1 of 1 records”) and pagination controls.
Add gateway
Opened by the add gateway button. The “Add gateway” dialog contains the “Main”, “Extended”, and “Routes” tabs.
“Main” tab
- “Type” – gateway protocol. Default is
SIP. Available values:SIP,H.323. - “Name” – unique gateway name; Latin letters, digits, and
-are allowed. - “IP” – IP address of the remote system.
- “Registration” – register the gateway on the remote system.
- “Accept incoming” – allow incoming calls through the gateway.
- “Allow anonymous users to use the gateway” – allow anonymous outgoing calls through the gateway.
“Extended” tab
- “Port” – port for incoming packets.
- “Transport” – transport protocol. Available values:
UDP,TCP,TLS. - “Insecure” – connection security level. Available values:
port,invite,very. - Qualify – send SIP OPTIONS to check availability. Available values: “Yes”, “No”.
- “Codecs” – codecs of the remote media server; selection is done by moving items between two lists.
- H.264 High Profile – video codec profile.
- “Media streams” – start media before the SIP session is established.
- “DTMF mode” – DTMF standard. Default is
rfc2833. Available values:rfc2833,auto,inband,info. - NAT – address translation mode. Available values: “No”, “Yes”,
Never / without 'rport' [rfc3581]. - Skype4B – treat the server as a Lync/Skype for Business VIS.
- BFCP – content sharing protocol. Available values:
TCP,UDP,NONE. - Media Encryption – media encryption. Available values:
NONE,SRTP. - From domain – SIP URI in the
Fromheader. - “Filtering RTP” – block extra media streams from the same media port.
“Routes” tab
Contains “Add” to create a call route through the gateway.
- “Cancel” – closes the dialog without saving.
- “Add” – saves the new gateway.
Edit gateway
Opened from the “Gateway” column. The dialog contains the same tabs as the add form.
“Main” tab
Contains name, IP address, registration, incoming, and anonymous call settings. “Type” cannot be changed after creation. When incoming calls are enabled, “Conversions incoming call numbers” is available.
“Extended” tab
Contains signaling, codec, DTMF, encryption, and RTP filtering parameters.
“Routes” tab
Contains the list of gateway routes.
- “Direction” – route or pattern.
- “Weight” – route priority.
- HuntStop – stop hunting when the route matches.
- “Notation” – route description.
- “Conversion” – conversion of the number sent to the gateway.
- “CallerId conversion” – calling party identifier conversion.
- “Add” – add a route.
- “Delete” – remove a route.
- “Save” – save gateway changes.
- “Cancel” – close without saving.